this is preliminary information on a new product now in deve lopment or undergoing evaluation. details are subject to change without notice. for further information contact your local stmicroelectronics sales office. april 2012 doc id 023095 rev 1 1/3 3 EVALSP1340CPU evalsp1340 evaluation board (rev. 2.2) for spear1340 data brief ? preliminary data features spear1340 embedded mpu 4 ddr3 chips (32-bit) 1 gb serial nor flash, 8 mb 8-bit nand flash, 2 gb 16-bit nand flash expansion connector audio stereo jack and microphone two usb 2.0 high speed host ports one otg 2.0 high speed port (micro usb-ab) one 10/100/1000 ethernet port one pcie x1 root complex connector one sata connector one sdio connector one uart serial port (up to 115 kbaud) lcd connectors (lvds bus - tft panel) camera module mems (accelerometer & magnetometer) debug port (cpu jtag connector) 10" lcd kit - order code evalsp1340lcd (optional) clcd video hdmi transmitter plugboard - order code evalsp1 340hdm (optional) description the evaluation board revision 2.2 is used to enable quick evaluation and debugging of software for the spear1340 embedded mpu. it acts as a learning tool for rapid familiarity with the features of the spear1340, as well as providing a reference design to use as a starting point for the development of a final application board. the EVALSP1340CPU board is equipped with interfaces to the high-speed peripherals embedded in spear1340 device. www.st.com
revision histor y EVALSP1340CPU 2/3 doc id 023095 rev 1 1 revision history table 1. document revision history date revision changes 13-apr-2012 1 initial release.
EVALSP1340CPU doc id 023095 rev 1 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
